![]() |
||||||||||||
|
||||||||||||
|
|
||||||||||||
|
|
Tuesday, May 22, 2007
***NOTE: This Blog has moved. Click here for the updated blog.*** Washing Pipettes Question:Is there a CAP approved procedure for washing pipettes? Answer: There is no CAP approved procedure for washing pipettes. Alconox, Inc recommends using Alcotabs in combination with a pipette siphon washer after a pre-soak with Alconox or Liquinox for effective batch pipette cleaning for laboratory use. Our suggested directions are to first completely immerse pipettes immediately after use in a pre-soak solution of 1% Alconox or 1% Liquinox. When ready to clean drop an ALCOTAB into bottom of siphon pipette washer. Place pipettes in holder into the washer. Turn on cold or warm water at a rate that will fill the washer and completely cover all pipettes, then drain to the bottom during each cycle. Run water until ALCOTAB has completely dissolved, continue running water to rinse thoroughly (may take an hour to complete washing and rinsing). For analytical or tissue culture work use distilled or deionized water for final rinse. |
Previous Posts
|
![]() |
|
| Home | Get Sample | Ask Alconox | Locate a Dealer | Literature By Mail | Site Map | About Us | Book & Sample Offer | | Customer Recommendations | Customer Purchasing | Healthcare | Pharmaceutical | Biotechnology | Medical Device | Laboratory | Environmental | | Food & Dairy | Electronic | Metalworking & Precision Mfg | Nuclear | Optical | Cosmetic | Filter | Tattoo | For Our Dealers | Alconox Site Index | Alconox, Liqui-Nox, Terg-A-Zyme, Alcojet, Alcotabs, Det-O-Jet, Detergent 8, Citranox, Luminox, Citrajet, Solujet and Tergajet are ® registered trademarks of Alconox, Inc. |
|
|